Uploads by Arclight
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 11:02, 18 December 2015 | Rpi mounting.jpg (file) |  |
1.48 MB | 1 | |
| 10:46, 18 December 2015 | GPIO.png (file) |  |
236 KB | 1 | |
| 10:38, 18 December 2015 | Raspberry pi connector.png (file) |  |
30 KB | Connector pinout for the RasPi header | 1 |
| 10:51, 15 October 2015 | Open Access Control v4 std 140.zip (file) |  |
67 KB | Version 1.40 firmware for Open Access Control v4 Standard. Now supports build/upload on Arduino 1.6+ | 1 |
| 13:46, 11 May 2014 | AC400 1024x1024 jumpers.png (file) |  |
1.21 MB | Jumper locations for Open Access v4 | 1 |
| 10:14, 24 October 2013 | RD-150 800.jpg (file) |  |
151 KB | RD-150 Reader (86x86mm, no keypad) | 1 |
| 10:29, 23 October 2013 | Open Access v4 schematic.pdf (file) |  |
72 KB | 2 | |
| 09:41, 23 October 2013 | Open Access Control v4 std 136.zip (file) | |
59 KB | Full firmware and libraries for Open Access v4 Standard hardware. Build 1.36 | 1 |
| 09:13, 23 October 2013 | Drill template v4.png (file) |  |
7 KB | Installation template for the Open Access v4. Provides a printable template for mounting holes. Be sure to print as "actual size (approximately 4x6"). | 1 |
| 09:07, 23 October 2013 | Openaccess-rpi.JPG (file) |  |
596 KB | Open Access v4, shown with optional Raspberry Pi add-on kit | 1 |
| 16:02, 20 June 2013 | HW reversing 101.pdf (file) | |
5.03 MB | Harware Reverse Engineering 101: Technical presentation from the Layer One 2013 hacker conference, held in Monrovia, CA. | 1 |
| 15:12, 7 February 2013 | 12v lighting control arduino code.zip (file) | |
2 KB | Arduino 1.x code for RGB, 12V common-negative light strip control. Suitable for a vehicle such as an RV or camper. | 1 |
| 11:16, 5 January 2013 | Open access v3 mega 800.JPG (file) |  |
429 KB | Open Access Control v3 Mega | 1 |
| 10:23, 5 January 2013 | 12V lighting controller.png (file) |  |
146 KB | PCB Layout for 4-channel, high-side controller | 1 |
| 09:54, 5 January 2013 | 12v light control v100.zip (file) | |
149 KB | Eagle files and Bill of Materials (BOM) for a 4-input, 4-output high-side switched based on Arduino RBBB and the TI LMD18400 high-side 3A switch. | 1 |
| 10:59, 28 June 2012 | EM Communication protocol.pdf (file) | |
228 KB | Another commercial (EM Card and Mifare) reader protocol. | 1 |
| 10:55, 28 June 2012 | YLMF507A protocol.pdf (file) | |
142 KB | RS-485 Protocol example for YLMF-507 Mifare Reader | 1 |
| 00:53, 26 June 2012 | Openaccess v3.pdf (file) | |
181 KB | 1 | |
| 10:57, 14 May 2012 | V3 refererence arch.jpg (file) |  |
164 KB | Reference architecture with Version 3 components | 1 |
| 10:33, 14 May 2012 | Deter horiz.png (file) |  |
12 KB | Deter-Detect-Delay-Respond Progression | 1 |
| 10:08, 14 May 2012 | 3-state alarm wiring.png (file) |  |
28 KB | Illustration of 3 and 4-state supervised alarm zone wiring | 1 |
| 09:23, 14 May 2012 | Open Access Control Mega Firmware v101.zip (file) | |
17 KB | Open Access Mega V3 Firmware, version 1.01 | 1 |
| 09:23, 14 May 2012 | Open Access v3.1 mega v100a8.zip (file) | |
230 KB | Open Access v3 Mega, version u8. Includes Eagle source files an BOM. | 1 |
| 08:52, 24 April 2012 | Open access ft sm.jpg (file) |  |
123 KB | Open Access v2.11 Board (Assembled/Front view) | 1 |
| 14:46, 29 December 2011 | Open Access Control Mega firmware v100.zip (file) | |
17 KB | Open Access Mega Firmware v1.00 Includes: -Ported to Arduino IDE 1.0 -Added support for 400 users -Added time/date set from CLI -Support for RS485 port, battery monitor, 8xrelays, 15xalarm zones | 1 |
| 14:39, 29 December 2011 | Open Access v3mega v100a6.zip (file) | |
224 KB | Update 6 of the Open Access Mega drawings and BOM. Changes include: -Fixed switching power supply schematic error -Updated silkscreen layout | 1 |
| 16:41, 1 December 2011 | Open access control v132.zip (file) | |
19 KB | Arduino Source Code and Packages for Open Access Control (v1.32) | 1 |
| 16:38, 1 December 2011 | Openaccess hw v211.zip (file) | |
100 KB | Eagle files (BRD and SCH), bill of materials (BOM) and documentation for the Open Access v2.11 board. | 1 |
| 16:36, 1 December 2011 | Openaccess v211.png (file) |  |
62 KB | Open Access v2.11 | 1 |
| 12:20, 1 December 2011 | Open access v3 mega a5.zip (file) | |
222 KB | Open Access mega Eagle Files (SCH and BRD) with Bill of Materials | 1 |
| 14:32, 30 November 2011 | Open access mega v3a5.png (file) |  |
69 KB | Open Access mega Board Layout | 1 |
| 10:07, 19 October 2011 | Opamps-1 by walter clark.pdf (file) | |
965 KB | Op Amp Tutorial by Walter Clark of Fullerton, CA. Excellent and thorough guide to the use of Operational Amplifiers in analog and other circuits. | 1 |
