Functional Blocks
Jump to navigation
Jump to search
External Power Supply
- 3-5A Switching PS
- Integrated or external battery backup
- 12V sealed lead-acid
- Connection point for monitoring DC/Battery voltage
Power Input Protection
- In-line or crowbar diode
- 6A Silicon rectifier type
- 30V MOV (10mm)
- Good for slow transients
- High energy capability
- Non-polarized
- TVS Diode
- Good for fast-moving transients
- Quick rise time
- LC or capacitor filtering
- Good for fast pulses, general ESD filtering and immunity
Internal Power Supply
- MC34063 Switching Power Supply
- Adaptable for 5V or 3.3V
- Cheap
Output Drivers and Protection
- Integrated Driver Chip
- ULN2004 or ULN2803 for 7-8 outputs
- Includes flyback diodes
- Suitable for relays or external
- Current-limit external (LED/buzzer) outputs
- SMT Resistors
Relays
- Form C relays for external switching
- Omron G5SB-1 DC12 (5A, rectangular)
- Omron G5LE-14 DC12 (10A, square)
- No ground plane on output traces
- Trace separation for 250V+ voltage rating
Logic input protection
- Current-limiting resistor
- MELF or other type with pulse-handling capability
- Pulse clamping
- TVS Diode
- Zener diode
- 0.22uF decoupling capacitor
- Provides ESD protection
- May cause problems with data signals
- ESD Suppression chips
- Op-Amp on inputs
- Provides impedence matching and logic buffering
- Good choice for high-impedence and other non-standard devices
Logic pull-up
- Internal pull-up resistor (software addressable)
- Provides ~50K impedence
- Some logic pins may not have pull-ups avialable
- Weak compared to external resistor/state easily changed
- External 10K resistor
- Robust, simple
- Not as flexible as internal pull-ups
- Can be configurable via jumper
RS-485 Circuit
- Integrated driver chips
- Dallas/Maxim
- MAX-485
- Texas Instruments
- SN65HVD485EDR
- Dallas/Maxim
Real-time Clock
- Dedicated chip with battery backup
- Dallas/Maxim
- DS-1307 (+/-20ppm, I2C)
- DS3231 (+/-2ppm, I2C)
- DS1302 (SPI, supercap backup)
- NXP
- PCF8563
- Dallas/Maxim
External Power Rails
- Overvoltage protection
- MOVs
- TVS diodes
- Overcurrent protection
- High-side switching ICs with built-in protection
- Polyfuses
- ESD Protection
- TVS diodes
- Decoupling caps
Terminals
- 3.5mm screw terminals
- Pluggable, straight
- Phoenix 8-position header, part #1945151
- Phoenix 2-position pluggable terminal, part #1984015
- Phoenix 3-position pluggable terminal, part #1984028
- Phoenix 4-position pluggable terminal, part #1984057
- Phoenix 6-position pluggable terminal, part #1984073
- Pluggable, right-angle
- Non-Pluggable
- Pluggable, straight