Design Requirements: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=== Specifications for Open Access 3.0 Hardware === ==== General ==== * Based on [http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega 2560] Microcontroller * Control at l...") |
|||
| Line 26: | Line 26: | ||
** Polyfuses or fuses for additional power outputs | ** Polyfuses or fuses for additional power outputs | ||
** Can be on-board or on separate power distribution board | ** Can be on-board or on separate power distribution board | ||
==== Physical ==== | |||
* 4x6" form-factor | |||
* Double-sided, SMT design | |||
* 3.5mm screw terminals | |||
Revision as of 07:25, 31 October 2011
Specifications for Open Access 3.0 Hardware
General
- Based on Arduino Mega 2560 Microcontroller
- Control at least 4 doors
- 4 Form C relays for doors (5A rating)
- 2-4 Form C relays for alarm, other functions (5A rating)
- Real-time clock accurate to +/- 20ppm
- Battery backup for date/time
- Allow for 4 Wiegand Readers
- 6-pin format to allow control of LED/Beeper
- PWR,GND,1,0,LED,BEEP
- Allow for wide range of pulse widths
- 20-400uS pulses from logic high to GND
- 6-pin format to allow control of LED/Beeper
- 8+ Supervised alarm zones
- 4-state supervision
- Detect faults such as zone cut/broken, short
- Detect closed and open states
- 2-terminal design
- Include current limiting and ESD protection
- 4-state supervision
- On-board switching PSU for 5V or 3.3V needs
- Input power protection
- Reverse polarity protection
- Surge and ESD protection
- Fused input rail
- External power rails
- Polyfuses or fuses for additional power outputs
- Can be on-board or on separate power distribution board
Physical
- 4x6" form-factor
- Double-sided, SMT design
- 3.5mm screw terminals