Goals and Road Map: Difference between revisions

From ACCX Products Wiki
Jump to navigation Jump to search
 
(28 intermediate revisions by the same user not shown)
Line 1: Line 1:
__NOTOC__
== Project Goals and Roadmap==
== Project Goals and Roadmap==
This page outlines our vision for the Open Access Control initiative.  
The goal of this project is to provide excellent Access Control and Security solutions based on open-source hardware and software.
[[File:v3_refererence_arch.jpg|right|400px]]


===Why are we doing this?===
=== Commodity Hardware and Software Focus ===  
This project came about when we wanted to add electronic access controls and monitoring to our [http://www.hackerspaces.org Hackerspace], the [http://shop.23b.org 23b Shop]. We noticed that all of the existing commercial solutions fell into two categories:
Open Access Control takes advantage of commodity items from many sources such as:
*Quality name-brand solutions that were really expensive
*Questionable offshore access controllers that were cheap but had no documentation or support
*A few one-off custom designs people had made for themselves.


The commercial solutions had one thing in common: they were closed-source and we could not access the code in any way.  
* Electric Door hardware
* Power supplies and enclosures
* Alarm Sensors
* IP video cameras ([http://www.onvif.org/ ONVIF Standard])
* Small-format PCs
* Open-source software for many common tasks
** Serial monitoring and logging
** Secure e-mail and SMS alerting
** Video processing ([http://en.wikipedia.org/wiki/OpenCV OpenCV])
** Basic video archiving ([http://www.zoneminder.com/ Zone Minder)]
** Home Automation ([http://wiki.linuxmce.org/ Linux MCE])
** Storage management and archiving
** Encryption
** Basic embedded systems development


Some of the custom designs we found looked promising, but were often based on a piece of difficult-to-source hardware that the creators had lucked into finding as surplus.
Our goal became to develop a fully open-source security solution made from commodity parts and open-source designs. This would enable anyone to write in support for new hardware, customize the work-flow for their systems, and leverage the pool of existing open-source software for monitoring, processing, alerting, database storage and other tasks.
 
Our goal became to develop a fully open-source security solution from commodity parts. We also wanted it to be affordable.


===Initial Project Goals===
===Initial Project Goals===
The initial [http://code.google.com/p/open-access-control/ Open Access Control] project had the following goals in mind:
The initial [http://code.google.com/p/open-access-control/ Open Access Control] project had the following goals in mind:
*Control 2 doors with electric hardware  
*Control 2 doors with electric hardware and Form C relays
*Support 2 Wiegand-format readers
*Support 2 Wiegand-format reader inputs
*Support 2 additional relays for chimes, sirens, etc.
*Support 2 additional Form C relays for chimes, sirens, etc.
*Have 4 supervised alarm zones
*Have 4 supervised alarm zones
*Support a real-time clock (RTC)
*Support a real-time clock (RTC) with battery backup
*Run independently of a PC, with internal database
*Run independently of a PC, with internal database
*Support attachment to a Linux PC for monitoring and alerting, remote access
*Support attachment to a Linux PC for monitoring and alerting, remote access
Line 26: Line 36:
We achieved this goal with the current design. Assembled boards, kits and readers are available in the [http://www.accxproducts.com/content/?page_id=63 ACCX Products Store].
We achieved this goal with the current design. Assembled boards, kits and readers are available in the [http://www.accxproducts.com/content/?page_id=63 ACCX Products Store].


===Next Project Goals===
===Current Development Effort===
After installing the Open Access Control in a few places, many people have asked us to continue development of the project.  
Following the success of the original Open Access Control, many people have asked us to continue development of the project.  


As a result, we formed [http://www.accxproducts.com ACCX Products] as a way to provide open-source designs for the system, and pay for the project with by selling consulting, commercially-produced boards, starter kits and other items.
As a result, we formed [http://www.accxproducts.com ACCX Products] as a way to provide open-source designs for the system, and pay for the project with by selling consulting, commercially-produced boards, starter kits and other items.


Our current project is to improve on the Open Access Control design and produce something close to the feature-set of the closed-source products available.  
=== Evolution of the Project ===
[[Project Evolution]]
 
=== Latest Project ===
The current project is a ground-up revision of the Open Access Control. This has been tentatively called "Open Access v3.0" Check out the [[Open Access 3.0]] Project Page for details.


===Roadmap===
===Project Roadmap===
*Develop a set of physical, electrical and logical interface standards to allow anyone working on open-source hardware and software for security applications to be compatible.
*Develop a set of physical, electrical and logical interface standards to allow anyone working on open-source hardware and software for security applications to be compatible.
*Develop a framework for end-to-end encryption of security transactions using AES and other industry-standard algorithms
*Develop a framework for end-to-end encryption of security transactions using AES and other industry-standard algorithms
*Design a new bi-directional protocol for Mifare, Near Field Communication, and other types of readers that support challenge-response
*Develop new bi-directional protocol fors [http://en.wikipedia.org/wiki/MIFARE Mifare], [http://en.wikipedia.org/wiki/Near_field_communication Near Field Communication], and other devices that support challenge-response.
*Produce a set of development kits to facilitate development by others. This may include:
*Produce a set of development kits to facilitate development by others. This may include:
**Wiegand break-out boards
**Wiegand break-out boards
Line 43: Line 57:
**Full featured Ethernet-capable boards
**Full featured Ethernet-capable boards
**CAN BUS boards
**CAN BUS boards
*Standardize an SDK for others to create exciting new devices and software for home automation, security and access control

Latest revision as of 11:15, 14 May 2012

Project Goals and Roadmap

The goal of this project is to provide excellent Access Control and Security solutions based on open-source hardware and software.

V3 refererence arch.jpg

Commodity Hardware and Software Focus

Open Access Control takes advantage of commodity items from many sources such as:

  • Electric Door hardware
  • Power supplies and enclosures
  • Alarm Sensors
  • IP video cameras (ONVIF Standard)
  • Small-format PCs
  • Open-source software for many common tasks
    • Serial monitoring and logging
    • Secure e-mail and SMS alerting
    • Video processing (OpenCV)
    • Basic video archiving (Zone Minder)
    • Home Automation (Linux MCE)
    • Storage management and archiving
    • Encryption
    • Basic embedded systems development

Our goal became to develop a fully open-source security solution made from commodity parts and open-source designs. This would enable anyone to write in support for new hardware, customize the work-flow for their systems, and leverage the pool of existing open-source software for monitoring, processing, alerting, database storage and other tasks.

Initial Project Goals

The initial Open Access Control project had the following goals in mind:

  • Control 2 doors with electric hardware and Form C relays
  • Support 2 Wiegand-format reader inputs
  • Support 2 additional Form C relays for chimes, sirens, etc.
  • Have 4 supervised alarm zones
  • Support a real-time clock (RTC) with battery backup
  • Run independently of a PC, with internal database
  • Support attachment to a Linux PC for monitoring and alerting, remote access

We achieved this goal with the current design. Assembled boards, kits and readers are available in the ACCX Products Store.

Current Development Effort

Following the success of the original Open Access Control, many people have asked us to continue development of the project.

As a result, we formed ACCX Products as a way to provide open-source designs for the system, and pay for the project with by selling consulting, commercially-produced boards, starter kits and other items.

Evolution of the Project

Project Evolution

Latest Project

The current project is a ground-up revision of the Open Access Control. This has been tentatively called "Open Access v3.0" Check out the Open Access 3.0 Project Page for details.

Project Roadmap

  • Develop a set of physical, electrical and logical interface standards to allow anyone working on open-source hardware and software for security applications to be compatible.
  • Develop a framework for end-to-end encryption of security transactions using AES and other industry-standard algorithms
  • Develop new bi-directional protocol fors Mifare, Near Field Communication, and other devices that support challenge-response.
  • Produce a set of development kits to facilitate development by others. This may include:
    • Wiegand break-out boards
    • RS-485 shields for Arduino
    • Low-cost single-door boards
    • Full featured Ethernet-capable boards
    • CAN BUS boards
  • Standardize an SDK for others to create exciting new devices and software for home automation, security and access control
Retrieved from "https://www.accxproducts.com/wiki/index.php?title=Goals_and_Road_Map&oldid=379"